Verykool i610 - Manual (Page 19)

14
User Profiles
General
1. Activate
2. Customize
 Tone Settings: Includes Incoming Call, Power on, Power off, Message, and Keypad.
 Volume: Includes the volume setting of Ring Tone and Key Tone. The volume degree is
from 1 to 7.
 Alert Type:
− Ring Only: Just ringing.
− Vib. Only: Just vibration, no ringing.
− Vib. and Ring: Ringing and vibration.
− Vib. then Ring: Ringing after vibration.
 Ring Type:
− Single: Rings once when a call is coming.
− Repeat: Rings continuously when a call is coming.
− Ascending: Rings continuously and the volume increases gradually.
 Extra Tone:
− Warning: If necessary, you will be warned by the prompt tone.
− Error: You will be warned by a tone if you make a mistake.
− Camp On: A prompt tone will be heard after searching the network successfully.
− Connect: A prompt tone will be heard after getting through to the dialed number.
 Answer Mode:
− Any Key: Press any key to answer a call (Except of Hang Up Key and Right Soft Key)
Meeting
Please refer to “General” for more details.
Outdoor
Please refer to “General” for more details.
Indoor
Please refer to “General” for more details.
Headset
Insert the earphone and access the Headset mode automatically. This mode has no Activate
options. Please refer to “General” for more details.