Verykool i720 - Manual (Page 38)

37
to pair with the device. This passkey is supplied by the
manufacturer of the other Bluetooth device, refer to
its documentation for further information. The
passkey feature ensures that only legitimate
connections are allowed to connect either to your
device or the selected device.
If you do not use the Bluetooth feature for some time, you
should deactivate it in order to conserve battery power.
Conn. Management
Data account
Default data accounts based on major operators at the time this phone is
manufactured are provided. You can access WAP via GSM Data or GPRS. To get the
analogue number or ISDN number information, you may need to contact your
operator for the service. To get the access point of GPRS, you may need to contact
your operator for the service.
WiFi
Enable WiFi: Enables the WiFi feature
Current Status: Check the WiFi status
Access point Setting: Allows you to set the Access point(s) manually
Search for networks: Search for available WiFi networks.
9.6 Restore Factory Settings
This feature resets the phone to the same settings as those configured at the
factory. In this case, it does not delete the downloaded objects and phonebook
records.
You will need to input password to restore factory settings. The initial password
is 0000.
Note: i720 supports WiFi 802.11 b/g and 802.11 b/g/n modems. But
connecting to a wireless N router that supports dual-band (300 Mbps) may cause
rapid battery drainage of your phone.