Plug and unplug the memory card, Plug and unplug the earphone, Status bar and content – Verykool R13 User Manual

Page 13

Advertising
background image

8

card will be permanently barred.

Note:
Your network operator will set a standard PIN
code (4 to 8 numbers) for you and you should
change it to private password as soon as
possible.

1.3 Plug and unplug the Memory card

 Power off the mobile phone, remove the rear
cover and battery.
 Open the memory card holder, and insert the
memory card into the slot at the bottom according
to the chat below, then close the memory card
holder.

1.4 Plug and unplug the earphone

Open the USB cover and insert the
connector of the earphone to the earphone
jack at the left side of the mobile phone.
Gently pull out the earphone to remove it.

1.5 Status bar and content

In standby screen you can get the information that
you need from the indication icons on the screen.

Advertising