Verykool R23 - Manual (Page 39)

PC with the attached USB cable, then the mobile phone becomes a
mass storage. If you connect USB cable to PC under the power on
status, according to tips you can select Mass Storage to enable
USB mass storage function or select Back to maintain the power
on status, and charge the mobile phone.
1.44 Webcam Function
In power on status, connect the phone to PC through USB cable
and select Webcam, the Webcam function is activated, you can do
the video chat with other person.
Requirements on PC configuration for use of webcam function:
1. The PC’s operation system is or newer than Windows XP SP2.
2. The tools for video chat need to be installed.
3. Internet network connection is smooth.
Other descriptions:
1. This function supports plug-and-play function.
2. The actual refresh rate of video chat is related with Internet
network speed, instead of the reasons of the mobile phone.
1.45 COM port
In power on status, connect the phone to PC through USB cable
and select COM port; you can synchronize your phone with PC.
Details about the related tools, please consult with Customer
Service Center.
14 Common Questions
The mobile phone cannot be powered on
n
The mobile phone cannot be powered on since the battery
voltage is too low. Please recharge the battery.
Unable to make some calls
n
Call barring has been set and barred utilization of the mobile
phone. Please check and cancel call barring.
Other person is answering my call
n
The mobile phone has been set into divert your calls to another
phone number. Please check and cancel call divert.
34