Verykool R620 - Manual (Page 36)

31
If a not bound SIM card is inserted on SIM1 or SIM2 slot, the phone
shall display the “Input phone password” popup. The default
password is “0000”.
 If the password is correctly inserted, the phone shall starts
regularly, but a popup should advise the user the SIM card is
changed: “SIM card is changed. Do you want to bind it?”
Choosing “Yes”, the current SIM cards will be bound replacing
the old ones; Choosing “No”, the old binding will remain active.
 If the password is wrongly inserted, the phone shall start and
provide the “new” user all the functionalities except the “SIM
binding” menu. In the meantime, one alert SMS (Attention: this
phone number is using your mobile phone IMEI:
XXXXXXXXXXXXXXX) shall be sent to all the trusted numbers
set in the menu.
Every time the power on password is wrongly inserted, the phone
shall continue to send SMS out. If SIM1 has no money or is out of
range, SIM2 shall provide to send alert SMS out. If the SMS is not
correctly sent out for any reason, the phone shall attempt to send
the SMS out periodically, until the SMS is correctly sent out.
14.6.7.2 Remote control
In Remote control, you can see the menu as below.
Activation: you can set remote control function on/off. The default
password is “0000”.
The remote control function is offered to provide end user the
possibility to manage some phone functions remotely from another
phone able to send SMS out. Using this function, end user can,
when he has not the phone with him, forward calls, power the phone
off.
Once the remote control function has been activated and one or
more trusted numbers have been inserted, the phone shall be ready
to accept command from remote authorized phone numbers.
Using the remote control command can achieve the function below: