Verykool R80 - Manual (Page 34)

location via GPRS.
Solemnly Tip: This system is only as a reference for your driving due
to the rapid development of urban transport. In this system, the map
may differ from the actual road conditions, please do not ignore traffic
rules and the actual road conditions. If there is traffic accident or any
other consequences during using this system, it is not responsible for
the company.
Note:
The software cannot be uninstalled, but you can remove digital
map data from the memory card manually. It is suggested you
backup the data before deleting. For the GPS application will not
work without map data. Some uses of the GPS function will
generate a fee for the connecting of GPRS. Please contact
Customer Service Center for detail information.
1.37Temperature
Enter into Temperature; the screen displays the temperature, pressure,
altitude of current location.
Press LSK to set the correct elevation at your first using, because it
requires a reliable source elevation data to determine the current height
of your location. If you cannot confirm, you can complete the height
definition through GPS function, for reference only because of accuracy
problems.
1.38UV sensor
Enter into UV sensor, select Ultraviolet Measure, test UV intensity
according to the phone hint. There will prompt the UV intensity and
advice in the screen after testing.
You can also enter Ultraviolet Explanation to learn about UV-related
content.
1.39Ecompass
Enter into the ecompass; you should calibrate the ecompass at first,
press LSK to enter and complete the calibration according to the
prompt information to determine the direction through the pointer. You
may have to repeat the calibration process more than two times
depending on the magnetic field surroundings.
Note:
The ecompass uses magnetic induction to sense earth’s magnetic
field, if there is a strong magnetic field around the phone, the
calibration will be affected. When using the ecompass to indicate