Verykool i1211 - Manual (Page 7)

3.2 Charging the Battery
The lithium battery delivered with the mobile phone can be put into use immediately
after being unpacked.
 Battery level indication:
 Your mobile phone can monitor and display the battery state.
 Normally the remaining energy of the battery is indicated by the battery level
icon at the upper right corner of the display screen.
 When the battery energy is insufficient, the mobile phone prompts "Battery
low".
 A charging animation appears when the battery is being charged. When the
charging is complete, the animation disappears.
 Using a travel adapter:
 Install the battery into the mobile phone before charging the battery.
 Connect the adapter of the travel charger with the charging slot in the mobile
phone. Ensure that the adapter is fully inserted.
 Insert the plug of the travel charger to an appropriate power outlet.
 During the charging, the battery level grids in the battery icon keep flickering
till the battery is fully charged.
 It is normal when the battery is become hot during the charging period.
 The battery icon does no longer flicker when the charging process ends.
 Using the Battery
The performance of a battery is subject to multiple factors: radio network
configuration, signal strength, ambient temperature, chosen functions or settings,
phone fittings, and the voice, data or other application mode you choose to use.
To guarantee the optimal performance of your battery, please stick to the following
rules:
 Use only the battery provided by the vendor. Otherwise, damages or even
injuries could be caused during the charging.
 Power off the mobile phone before removing the battery.
 The charging process lasts a longer time for a new battery or a battery not in
use for long. If the battery voltage is too low to enable the mobile phone to be
powered on, charge the battery for a longer time. In this case, the battery icon
does not flicker until a long time after the battery enters the charge status.
 During the charging, ensure the battery is placed in a room temperature
environment or in an environment close to room temperature.
 Immediately stop using the battery if the battery produces odor, overheats,
cracks, distorts or has other damage, or if the electrolyte leaks.
 The battery wears out with use. A longer charging time is required as the
battery is put into use for a long time. If the total conversation duration
decreases but the charging time increases even though the battery is properly
charged, purchase a standard battery from the OEM or use a battery approved
by our company. Using any poor-quality fittings will cause harm to your mobile
phone or even incur danger!