Verykool R80L - Manual (Page 26)

21
function needs to be supported by the network service provider. Please
get in touch with the related network service provider to open the
relevant service.
Call waiting: you can activate/deactivate the function and also can
query the status of call waiting. After the function being activated, if you
have a new incoming call while in calling process, your mobile phone will
display the new call screen, and the call can be received normally. If the
function is deactivated, new incoming calls cannot be displayed.
Call divert: this function is used to transfer the call to your designated
phone. The success of call divert setting is related with the network and
SIM card. The system will give appropriate setting tips.
Note:
If the transfer call you set is a fixed phone, please add the area
code before the fixed phone.
Call block: this function needs network support. Please contact your
network provider to open this business. Network provider will provide the
corresponding network password for you activate call block service.
Line switching: switch the phone current line.
Advanced setting: you can set the function such as black list, auto
redial, IP dial, background sound, call time reminder, auto quick end,
reject by SMS and so on.
5.10.4 Network settings
In network settings, you can select appropriate network.
Note: Please do not register networks inconsistent with the SIM
card, so as to prevent unavailability of normal use. For details,
please consult your service provider.
Network selection: search new network according to the network
searching mode or select the network you need from the network list.
Preferences: select and set the preferences of network.
GPRS Connection: you can set GPRS as always connected or
connected when needed.
Flight Mode: you can set the phone standby profile as Normal Mode,
Flight Mode or Query When Power On.
5.10.5 GPS settings
You can set the mode for receiver, AGPS and time sync.
If you want to use the function of AGPS, you should make it on first and
then to enter the edit screen of AGPS profiles to select the correct data
account from GPRS and active this profile. Thus, you can use the AGPS
function in GPS mode.