Verykool i603 - Manual (Page 10)

3
3.3 How to charge the battery
Plug one end of the charger to the phone charging port, the other end into a
household power outlet.
Note: This machine can be connected to a computer USB port to
charge.
When charging the battery level indicator on the screen icon was dynamic
display, until the battery is full up.
After charging, disconnect the power, then unplug the charger, so that the
charger no-load.
3.4 How to install & remove the SIM card
1. The machine supports Single SIM cards. Before doing the following,
make sure the phone is turned off and no charging.
2. Open the back cover, remove the battery.
3. Make the golden contacts of the SIM card face down, Card gap facing
the slot gap, and then put into it.
4. Install the battery and close the battery cover.
SIM card's removal and installation steps are in reverse.
4 Make & receive calls
4.1 make a call
Enter the phone number in the standby screen, press the Send key to make
calls.
When input, press RSK to delete the number.
During the call press the end key to end the call.
Directly in the call logs can also call:
1. In the idle screen press the Send key to enter the call log.
2. Press the navigation up and down keys to select the number to dial.
3. Pressing the Send key will make the call.
Press RSK in the standby screen enter the Call logs, and press the
navigation key to view the call logs and call settings.
4.2 Make an emergency call
Within the GSM system, you can make an emergency call. When making
an emergency call, please do not arbitrarily terminate the call. Phone