Cisco WRV54G User Manual
Page 46
42
Chapter 6: Configuring the Router
The Administration Tab
Wireless-G VPN Broadband Router
Figure 6-31: Log
•
SNMP Trap-Community. Enter the password required by the remote host computer that will receive trap
messages or notices sent by the Router.
•
SNMP Trap-Destination. Enter the IP address of the remote host computer that will receive the trap
messages.
UPnP
UPnP allows Windows XP to automatically configure the Router for various Internet applications, such as gaming
and videoconferencing. To enable UPnP, click Enabled.
•
Allow User to make Configuration Changes. When enabled, this feature allows you to make manual changes
while still using the UPnP feature.
•
Allow users to disable Internet access. When enabled, this feature allows you to prohibit any and all Internet
connections.
When finished making your changes on this tab, click the Save Settings button to save these changes, or click
the Cancel Changes button to undo your changes.
Log
The Log tab, shown in Figure 6-31, provides you with a log of all incoming and outgoing URLs or IP addresses for
your Internet connection.
Email Alert
To enable E-Mail Alert, click Enabled.
•
E-Mail Address for General Logs. Enter the E-Mail Address for General Logs in the field.
•
E-Mail Address for Alert Logs. Enter the E-Mail Address for Alert Logs in the field.
•
Return E-Mail address. Enter the address for the return E-Mail.
•
E-Mail Server IP Address. Enter the IP Address of the E-Mail Server in the fields.
Syslog Notification
To enable Syslog, click Enabled.
•
Device Name. Enter the Device Name in the field.