K-Edge K13-201 - Manual

Dirt 3 Chain Catcher Installation Instructions
(K13-201)
Description:
The K-Edge Dirt Chain Catcher series is designed to eliminate chain drop on the lowest chainring due to hard shifts, cross-chain
shifting and or rough terrain while riding.
Compatibility:
The K-Edge Dirt 3 series can be used with triple MTB cranksets compatible with an 'E-Type' or 'Bottom Bracket Mount' front
derailleur utilizing external bottom bracket cups or NON-GXP bottom brackets. This device cannot be used in conjunction with an 'E-
Type' front derailleur as it is mounted in the same location.
Warnings:
All K-Edge products are to be installed by a professional bike mechanic.
These instructions are generalized to accommodate a wide ranges of setups for a bike. If your setup does not match what is being
described, take extra care in the process of your setup and contact K-Edge Support if you have any questions.
Improper installation of any K-Edge product or use outside of its design intentions could lead not only to damaging the bike but could
also cause personal injury to the rider.