K-Edge K13-220 - Manual

Dirt Adjustable Installation Instructions
Description:
The K-Edge Dirt Adjustable series was designed to offer riders the freedom of choice between triple (Dirt 3), double (Dirt
2T), and double specific (Dirt 2) drivetrains while being able to utilize a K-Edge chain catcher for any of those situations
with the simple 'swap' of a pad. Furthermore, it was designed to give the rider adjustability depending on his/her crankset
configuration.
Compatibility:
The K-Edge Dirt Adjustable series can be used with cranksets compatible with an 'E-Type' or 'Bottom Bracket Mount' front
derailleur utilizing external bottom bracket cups or NON-GXP bottom brackets. This device cannot be used in conjunction
with an 'E-Type' front derailleur as it is mounted in the same location.
Chainring Size Range:
Dirt 3 Adjustable Pad: 22T-26T
Dirt 2T Adjustable Pad: 32T-36T
Dirt 2 Adjustable Pad: 26T-30T
Warnings:
All K-Edge products are to be installed by a professional bicycle mechanic.
These instructions are generalized to accommodate a wide range of setups for a bike, if your setup does not match what
is being described take extra care in the process of your setup and contact K-Edge Support if you have any questions.
Improper installation of any K-Edge product or use outside of its design intentions could lead not only to damaging the
bike but could also cause personal injury to the rider.
Parts Included:
 1x Dirt Adjustable Body
 3x 0.5mm Nylon Spacers
 1x Dirt Pad
 1x M3 x 0.5 x 6mm SS Bolt
Tools/Items Required:
 Manufacturer's Instructions with torque specs for Crankset and Bottom Bracket
 Bottom Bracket Tool
 Torque Wrench

Metric Allen Set (2mm for Pad)