K-Edge K13-020-31.8 - Manual

Cycle Cross Chain Catcher Installation Instructions
(K13-020-31.8 & 34.9, K13-021-31.8 & 34.9,
K13-022-31.8 & 34.9, K13-023-31.8 & 34.9)
Description:
The K-Edge Cross Chain Catcher series is designed to eliminate chain drop on the lowest chainring due to hard shifts, cross-chain
shifting and or rough terrain while riding. In addition, chain drop on the single chainring cycle cross due to rough terrain.
Furthermore, the Chain Catcher Pad itself is designed to allow for 'bottom' chain derailment without chain drop when back pedaling
is necessary for foot adjustment and will re-align the chain when forward pedaling is resumed.
Compatibility:
K13-020 and K13-021 Cross catchers are compatible with framesets that allow for a 'low' mounting position of our clamp (Minimum
of 53.2mm from the bottom of the cross clamp to the center axis of the crank spindle is required for a 32T chainring).
K13-022 and K13-023 Cross XL chain catchers are compatible with carbon fiber frames that have a 'web' or large 'gusset' between
the down tube and the seat tube of the frame. This 'web' prevents our original cross catchers (020 and 021) from mounting low
enough to be effective.
Warnings:
All K-Edge products are to be installed by a professional bike mechanic.
These instructions are generalized to accommodate a wide range of setups for a bike. If your setup does not match what is being
described, take extra care in the process of your setup and contact K-Edge Support if you have any questions.
Improper installation of any K-Edge product or use outside of its design intentions could lead not only to damaging the bike but could
also cause personal injury to the rider.
Parts Included:
 1x Cross Chain Catcher Pad (020, 021, 022, or 023)
 1x M4 x 8mm socket head stainless steel bolt
 1x M4 Flat washer
 1x Clamp 020 & 022 (31.8mm or 34.9mm diameter)