K-Edge K13-520-[color] - Manual

1
WARNING: IT IS STRONGLY RECOMMENDED THAT YOU PERIODICALLY CHECK ALL BOLTS FOR PROPER TORQUE!!!
GARMIN® Mount Installation Instructions
(K13-520-[color])
Description:
The K-EDGE GARMIN Fixed Stem Mount is designed for installation of a GARMIN Edge® or GARMIN Forerunner® computer onto
a 1-
1/8” Steerer Tube stacked above the stem.
Compatibility:
The K13-520 GARMIN Fixed Stem Mount is compatible with all GARMIN Edge® 200, 500, 510, 800, and 810 computers. It is also
compatible with the GARMIN Forerunner® 310XT and 910XT (with 'quick-release kit' purchased separately from GARMIN)
computers utilizing the same mounting system. NOTE: The GARMIN Forerunner® 910XT prevents the addition of a spacer on top
of the K13-520 due to interference issues
– it is recommended that spacer be installed below the K13-520.
STEM RECOMMENDATIONS:
Stem Angle: 0 to Negative-Degree
Warnings:
These instructions are generalized to accommodate a wide range of setups for a bike. If your setup does not match what is being
described, take extra care in the process of your setup and contact K-EDGE Technical Support if you have any questions.
Improper installation of any K-EDGE product or use outside of its design intentions could lead not only to damaging the bike and
related components but could also cause personal injury to the rider.
Parts Included:
 K13-520
 1x K-EDGE GARMIN Fixed Stem Mount
 2x M3 x 6 mm (Blue Thread Lock applied)
Default Insert Position
for Garmin Edge ®
Insert Position for Garmin
Forerunner ® 310XT and 910XT