Keri Systems Keri USB-A - Manual

Keri USB-A Connection and Configuration
01576-011 1 of 7
Step 1 - Connect the KPC-1 cable to the K-USB.
Step 2 – Plug the USB Connector of the K-USB to any available USB port on the
PC.
Step 3 – Plug the one end of the KPC-1 into the K-USB and the other end into the
black RJ-45 connector (J2) on the NXT controller.
NOTE: The form of the
USB converter may
vary, so the unit you
receive may not be
identical to the one
displayed here.