KERN & SOHN TEE 150-1 - Manual (Page 2)

GB
KERN TEE
Version 1.0 11/2006
Operating instruction
Pocket balance
1. Technical Data
• Weighing range (Max):
150 g
• Readout (d):
0.1 g
• operating conditions:
18 – 25 °C
max. 85% air humidity (not condensing)
• power supply:
2 x 1,5V „AAA“
2. Operation
• Press the “ON” – key, the balance displays “8.8.8.8” and switches to “0.0 g”.
• Place the weighing object in the middle of the weighing platform; the weight in grams is shown
on the display.
• By pressing “ZERO” the balance can be reset to “0.0 g”.
• Weighing unit switch-over: from g to OZ (button under balance)
3. Package Volume
• Pocket
Balance
• Balance
cover
• Batteries (2 x 1,5V „AAA“)
• Operating
instructions
4. Adjustment
• By pressing “CAL” for 3 seconds until “CAL” appears on the display.
• Let loose the “CAL”-key; the display shows “100”.
• Place recommended adjusting weight (100 g, class M3, not included).
Information concerning the adjusting weights is available at: http://www.kern-sohn.com
• The display switches to “F” and the adjustment is complete.
• If other messages are on the display, the adjustment was faulty.
Please repeat the adjustment process.
5. Important Notes
• Do not overload the balance (when overloaded, error message “E” appears)
• With the occurrence of electromagnetic fields deviations of the displayed weight value are
possible. In case of deviations change location.
• Avoid high air humidity, vapours and dust, because the balance is not hermetically closed. Do
not bring the balance in direct contact with liquids. Liquids could enter the load cell.
• No permanent load on the weighing platform.
• Never operate the balance in rooms where danger of explosion exists.
• Regularly check the balance with the test weight.
• Warranty expires as soon as the balance is opened.