KERN & SOHN AEJ 100-4NM - Manual (Page 30)

30 AEJ_N/AES_N-BA-e-1321
8 Menu
The menu is subdivided into seven menu blocks (P1 – P7).
P1 CAL [adjustment]
P1.1 iCAL | [internal adjustment] ALJ only
P1.2 ECAL | [external adjustment] *
P1.3 tCAL | [adjustment test]
P1.4 ACAL | both/nonE/tenno/tinnE [automatic adjustment] ALJ only *
P1.5 CALt | 1 h ÷ 12h [time setting for automatic adjustment] ALJ only *
P1.6 CALr | YES/no [printout adjustment log]
* = locked in devices with type approval certificate
P2 GLP [good lab practice]
P2.1 USr | _ [Enter user name]
P2.2 PrJ | _ Enter [project name]
P2.3 Ptin | YES/no [printout time]
P2.4 PdAt | YES/no [printout date]
P2.5 PUSr | YES/no [printout user]
P2.6 PPrJ | YES/no [printout project]
P2.7 PId | YES/no [printout serial number weighing balance]
P2.8 PFr | YES/no [frame printout]
P3 rEAd [main functions]
P3.1 AuE | Stand/Slouu/FASt [filter settings]
P3.2 ConF | FASt_rEL/Fast/rEL [rest control display]
P3.3 Auto | On/OFF [Auto zero]
P3.4 Ldi9 | ALuuAYS/never/uu_StAb [delete last decimal place]
P4 Print [parameter for serial interface RS 232]
P4.1 bAud | 2400/4800/9600/19200 [Baud rate]
P4.2 CntA | YES/no [continuous output standard weighing unit]
P4.3 Cntb | YES/no [continuous output currently set weighing unit]
P4.4 rEPL | YES/no [manual (press key) or automatic output]
P4.5 PStb | YES/no [output stable/instable weighing values]
P4.6 Lo | 000.0000 [input minimal weight for automatic output]