KERN & SOHN AEJ 100-4NM - Manual (Page 34)

34 AEJ_N/AES_N-BA-e-1321
9 Weighing functions P6 func
9.1 Turn on/off balance

The weighing scale will carry out a self-test after having been connected to the
power supply and will then automatically go into weighing mode.

To switch off pres the ON/OFF-key; “oFF“, will be displayed. The balance is
now in stand-by mode No warming-up up time is required and it will be ready for
operation immediately after switching on (Press ON/OFF-key).

To switch-off the balance completely, separate balance from power supply.
9.2 Weighing
A warm-up time is required for stabilisation (see chap. 1).

Check zero display [ ] and set to zero with the help of the TARE key, as
required.

Place the goods to be weighed and close the wind screen doors

Wait until the stability display appears ( ).

Read weighing result.
When an optional printer is connected, the weighing value can be edited.
Printout example (KERN YKB-01N):
Date : 23/07/12
Time : 09:16
User Id : KERN
Project Id : ABC
Balance Id : 350938
19.999[3] g
The non-calibrated value is given in
brackets in calibrated scales.