KERN & SOHN AEJ 100-4NM - Manual (Page 54)

54 AEJ_N/AES_N-BA-e-1321
13.1 Parts counting
Before the balance can count parts, it must know the average part weight (i.e.
reference). Proceed by putting on a certain number of the parts to be counted. The
balance determines the total weight and divides it by the number of parts (the so-
called reference quantity). Counting is then carried out on the basis of the calculated
average piece weight.
As a rule:
The higher the reference quantity the higher the counting exactness.
• Call add-up function

Press the UNIT-key to select the desired reference number of pieces,
selectable options include 10, 20, 50 or free.
• Reference piece number 10, 20 or 50

Confirm your selected reference number of pieces by pressing the PRINT-key
(such as 20).
Current reference number of
pieces is displayed.