KERN & SOHN AEJ 100-4NM - Manual (Page 61)

AEJ_N/AES_N-BA-e-1321 61
13.3 Percent determination
Percent determination allows weight display in percent, in relation to a reference
weight. The reference weight can either be determined by weighing (F4 PrcA) or
entered numerically (F4 Prcb).
13.3.1 Determining the reference weight by weighing (function F4 PrcA)

100 % equals placing.

Confirm by pressing the PRINT-key and the weight will be adopted as reference
(100%).

Remove reference weight; from here the weight of load is shown in percent
based on the reference weight.