KERN & SOHN AEJ 100-4NM - Manual (Page 81)

AEJ_N/AES_N-BA-e-1321 81
14.6 Remote control instructions
Commands Function
T CR LF Taring
Z CR LF Zeroing
SI CR LF Send weighing value in standard weighing unit immediately
S CR LF Send stable weighing value in standard weighing unit
SU CR LF Send stable weighing value in current weighing value
SUI CR LF Send weighing value immediately in current weighing unit
C1 CR LF Start continuous output in standard weighing unit
C0 CR LF Stop continuous output in standard weighing unit
CU1 CR LF Start continuous output in current weighing unit
U0 CR LF Stop continuous output in current weighing unit
In the case of faulty entries the weighing balance generates feedback
message “ES CR LF”.