4 monitoring the test substances, 3 fundamental safety information, 2 staff training – KERN & SOHN ECE 50K20 User Manual
Page 5: 4 transport and storage, 1 acceptance check, 2 packaging / return transport, Monitoring the test substances, Fundamental safety information, Staff training, Transport and storage
2.4 Monitoring the test substances
The metrology features of the balance and any possible available adjusting weight
must be checked at regular intervals within the scope of quality assurance. For this
purpose, the answerable user must define a suitable interval as well as the nature
and scope of this check. Informati
) with regard to the monitoring of balance test substances and the test
weights required for this. Test weights and balances can be adjusted quickly and at
a reasonable price in KERN’s accredited DKD calibration laboratory (return to na-
tional normal).
3 Fundamental safety information
3.1 Observe the information in the operating instructions
Please read the operating instructions carefully before erecting and commissioning,
even if you already have experience with KERN balances.
3.2 Staff training
The device may only be operated and looked after by trained members of staff.
4 Transport and storage
4.1 Acceptance check
Please check the packaging immediately upon delivery and the device during un-
packing for any visible signs of external damage.
4.2 Packaging / return transport
Ö Keep all parts of the original packaging for a possibly required re-
turn.
Ö Only use original packaging for returning.
Ö Prior to dispatch disconnect all cables and remove loose/mobile
parts.
Ö Reattach possibly supplied transport securing devices.
Ö Secure all parts such as the glass wind screen, the weighing plat-
form, power unit etc. against shifting and damage.
ECE-BA-e-1120
5