KERN & SOHN DS - Manual (Page 28)

7 Operation
7.1 Display control panel
Keyboard
ON / OFF
Print weighing result
in MODE: No / descending
in % and counting mode:
Form reference
in MODE: Yes / ascending
MODE configuration
(see mode structure diagram page 2)
Formula weighing
in MODE: to left
Change g-pieces
Unit changeover
in MODE: to right
Tare
in MODE: back in weighing operation
Display-Symbol Meaning
==OVERLOAD== Overload: Weighing range has been exceeded
============= Underload: Weighing range has been fallen short of
<< . In counting and % mode: part too light
 . Automatic tare active / In verification operation zero display
PTA . Preselect tare Tare pre-selection active
D . Difference in % during percentage weighing
Net . Net weight of the components during formula preparation
SUM . Gross weight of several components during formula preparation
 . Balance is in counting mode and currently displaying the weight value of the count-
ing amount
III. For multirange balance in verification operation indication of range
Wait > 299 s Warm-up time if verifiable (switch-on drift monitoring)
572/573/KB/DS/FKB/KBJ-BA-e-1472 28