KERN & SOHN WTB 30K-2NM - Manual (Page 21)

7.1.1 Adjustment non verifiable models
Display
Operation

 Start balance by pressing
 While the balance carries out a self test (00…- 99…), press
and keep pressed until „F1 CAL“ appears on the
display.
 Press
;
in the display appears „UnLod“. Wait for the triangle above
the stability symbol, then press , the value of the last-
used adjustment weight is displayed. Exp: „6 kg“. If
necessary, change value by .
(example)
 Place the adjustment weight
 Wait for the triangle above the stability symbol
 Press
While the balance carries out a self-test, take away the
adjustment weight
The balance changes over to zero display.
Now the process of adjustment is completed.
If the display shows an error message or an incorrect value, repeat adjustment
process. If the error message remains, please contact your dealer.
21 WTB-N_WTB-NM-BA-e-1421