KERN & SOHN FOB 30K-3NL - Manual (Page 22)

8.4 Menu settings
8.4.1 Setting weighing units
Balance display
Operation

FOB-S:
 In weighing mode press button for approx.
3 seconds.
„SEt“, followed by „Unit“ is displayed
FOB-L:
 Switch off the balance
Press and hold and press 3x at the
same time, then release both buttons.
 Press or again, the weighing unit „g“ is
displayed
(example)
 Use
to change to the desired unit
 Press or , "OFF" is displayed
(example)
 Use
to change to „On“
(example)
 Press or , the selected unit is displayed
and set.
22 FOB-N-BA-e-1410