1 placing, 2 scope of delivery, 3 mains connection (optional) – KERN & SOHN FOB 30K-3NL User Manual
Page 9: 4 battery operation, Placing, Scope of delivery, Mains connection (optional), Battery operation
5.2.1 Placing
The balance must be installed in a way that the weighing plate is exactly in horizontal
position.
5.2.2 Scope of delivery
Serial accessories:
• Balance
• Weighing plate
• Mains adapter (optional)
• Protective cover
• Operating manual
5.3 Mains connection (optional)
The balance may be operated via the optional mains adapter. The stated voltage
value must be the same as the local voltage.
Only use original KERN mains adapters. Using other makes requires consent by
KERN.
5.4 Battery operation
Unscrew battery cover on the bottom of the housing (see figure 1).
• 9 V block battery (FOB-NS) or
• 4 x 1.5V AA batteries (FOB-NL)
Put battery cover back in place and tighten it.
Fig. 1:
FOB-NS
FOB-NL
When you tighten the battery cover, make sure that not too much pressure
is put on the weighing plate. The load cell may be damaged.
FOB-N-BA-e-1410
9