KERN & SOHN RPB D - Manual (Page 22)

7 Operation Mode
7.1 Turn on/off
 To turn on/off confirm forward at the underneath on the right of the scale and
keep pressed for a little while. The balance will carry out a self-test. As soon as
the weight display shows "0" in all the three display windows your balance is
ready to weigh.
 To switch-off push backward the switch-on/switch-out on the right lower side of
the balance.
7.2 Zeroing
Resetting to zero corrects the influence of light soiling on the weighing plate.
 Unload the balance
 Press , the balance starts resetting to zero.
The indicator [
] above
appears.
7.3 Weighing with taring
 Deposit weighing vessel. After successful stop check press the button. Zero
display and the indicator [
] above [NET] appear.
 Weigh the material, the net weight will be indicated.
 The weight of the weighing container will be displayed as a minus number after
removing the weighing container.
 To delete the TARE value unload the weighing plate and press , the indicator
[
] above [GROSS] appears.
7.4 Overload warning
Overloading exceeding the stated maximum load (max) of the balance, minus a
possibly existing tare load, must be strictly avoided. This could cause damage to
the balance.
Exceeding maximum load is indicated by the display of “„-OL-“, and an audio
sound. Unload balance or reduce preload.
RPB_D-BA-e-1425 22