KERN & SOHN CDS - Manual (Page 20)

7.5 Printer
The serial interface RS 232 facilitates the connection of a printer. The printout shows the weight in grams. In
counting mode either the piece number or the weight details will be printed out.
In percentage mode the percentage proportion or the weight details will be printed out.
Printout will take place after pressing the PRINT key.
It is possible to number each printout continuously with the help of the numerator.
The numerator will be reset to (000) each time the balance is turned off or the CLEAR function is actuated.
7.6 Underfloor weighing
Objects which are unsuitable for placement on the weighing tray due to their size or shape can be weighed with
the help of the underfloor weighing facility.
Proceed as follows:
• Switch off balance.
• Turn over the balance and in doing so take care that the weighing plate is not loaded.
• Open the closing lid on the bottom of your balance.
• Mount the hooks for underfloor weighing.
• Put the balance over an opening
• Suspend the goods to be weighed from the hook and carry out the weighing.
! Caution!
Pay attention that the hooks used for underfloor weighing are stable enough to provide a secure
support for the desired items to be weighed (risk of breakage). Always ensure that there are no
persons, animals or objects that might be damaged underneath the load.
! Note!
After completing the underfloor weighing the opening on the bottom of the balance must always be
closed (dust protection).
CKE/CDS-BA-e-1526 20