KERN & SOHN EOS F - Manual (Page 22)

EOS_F-BA-e-1112 22
Setting channels
(display unit)
+
(platform)
The balance has the possibility to set different channels. This is
particularly necessary if several platforms are inserted next to
each other. In this case failures may appear if not different
channels have been set. It is possible to select between 3
channels.
Setting channels on the display unit:
Set rocker switch next to the platform to „1“.
Switch-on display unit using
ON/OFF button and wait for zero
display. The data receiving symbol flashes
The triangle displays the selected channel.
If the data receiving symbol does not appear, use the
CH1-3
button to change to the correct channel
Setting the channels on the platform:
Switch-off platform (rocker switch on the side to „0“)
Actuate the dip switch at the lower side of the platform. (pin 4 is
not used).