8 service, maintenance, disposal, 1 daily check, 2 cleaning – KERN & SOHN BAN 3T-3M User Manual
Page 11: 3 service, maintenance, 4 disposal, Service, maintenance, disposal, Daily check, Cleaning, Service, maintenance, Disposal
8 Service, maintenance, disposal
Before any maintenance, cleaning and repair work disconnect the
appliance from the operating voltage.
8.1 Daily check
Ö
Ensure that all four feet are in contact with the floor.
Ö
Ensure that the connecting cable to the display unit and the network connection
cable of the display unit are not damaged.
Ö
Ensure that the balance is free from dirt, especially under the edges of the
balance.
8.2 Cleaning
Ö
Remove regularly corrosive substances.
Ö
Keep IP protection.
Ö
Protect weighing cells against splash water.
Ö
When using optional ramps or foot plates, keep clean the air gap at the edge of
the weighing bridge.
Ö
Wipe the surfaces with a damp cloth.
Ö
Only use common household cleaners.
Ö
Do not use water jet or high-pressure cleaner.
8.3 Service, maintenance
Ö
The appliance may only be opened by trained service technicians who are
authorized by KERN.
Ö
Ensure that the weighing system is regularly calibrated, see chap. 3.5 Testing
instruments control.
8.4 Disposal
Ö
Disposal of packaging and appliance must be carried out by operator according
to valid national or regional law of the location where the appliance is used.
11
KFP
V40-IA-e-1110