KERN & SOHN MAP 130K1 - Manual (Page 22)

22 MAP-BA-e-1212
Counting mode
1. Call mode
 Switch on the device by pressing the /zero key.
 Press mode key repeatedly until the count display ap-
pears.
2. How to define the strength limit
The currently set strength limit is displayed.
To change, press the mode key repeatedly until the de-
sired strength limit is displayed. Ensure that the capacity of
the spring is not exceeded (e. g. strength limit for 20 kg
spring set < 20 kg).
Confirm by pressing the set key; count display appears.