KERN & SOHN HMR - Manual (Page 2)

Sauter GmbH
Ziegelei 1
D-72336 Balingen
E-Mail: [email protected] Tel: +49-[0]7433- 9933-199
Fax: +49-[0]7433-9933-149
Internet: www.sauter.eu
Instruction Manual
HMR
HMR-BA-e-1212 2
 Software calibration function

Software to connect with PC and USB port
 Compact metal case, suitable for use under poor
working conditions

Continuous working period of not less than 50
hours with two Alkaline batteries (AA size);

Auto Power Off to save energy
 Dimensions: 132 mm x 76.2 mm

Weight: 345 g
1.2 Main Application & Testing Range
1.2.1 Main Application
 Die cavity of molds

Bearings and other parts

Failure analysis of pressure vessels, steam
generators and other equipment

Heavy work piece
 Testing the surface of a small hollow space

Material identification in the range of metallic
materials
1.2.2 Testing Range
Please refer to Table 1 and Table 2 in the APPENDIX.
1.3 Configuration
Table 1-1
No. Item Qua
ntity Remarks
Stan
dard
Config
uration 1 Main body 1
2 D type impact
device 1 With cable
3 Standard test
block 1
4 Cleaning brush
(I) 1
5 Small support
ring 1
6 Alkaline battery 4 AA size
7 Manual 1
8 Instrument case 1
9
Optio
nal
Config
uration 11 Cleaning brush
(II) 1 For use with G
type impact
device
12 Other type of
impact devices
and support
rings Refer to Table 3
and Table 4 in
the appendix.
13 DataPro for
HL200 software 1
14 Communication
cable 1
1.4 Working Conditions
Working Temperature: 0°C up to +40°C
Storage Temperature: -30°C up to +60°C
Relative humidity:
≤ 90%
Vibrations, strong magnetic field, corrosive medium and
heavy dust should be avoided in the surroundings.
2. Structure Feature & Testing Principle
2.1 Structure Feature
2.1.1 Hardness Tester Appearance
1. Main body 2.Impact device
2.1.2 Parts of the Main body
1 Socket of USB
2 Aluminium case
3 Belt hole
4 Battery cover
5 Keypad
6 LCD Display
7 Socket of Impact Device
8 Aluminium case, (backside)
9 Label (backside)
2.1.3 D Type of Impact Device
1. Release button
2. Loading Tube