Culligan Model 900 - Manual (Page 15)

Culligan Hi-Flo
®
52 Softener Engineer’s Specification Page 7
valve controls to admit the correct volume of fresh water to the brine tank in accordance with the salt dosage
setting on the controls. The brine valve will include a float operated safety shut-off valve as a back up to the
timed refill from the main operating valve control to prevent brine tank overflow.
4.7 ACCESSORIES
(All Optional selections)
4.7.1 ¨ Water test kits for hardness tests will be supplied.
4.7.2 ¨ Pressure Gauges for hard water inlet and soft water outlet.
4.7.3 ¨ Sampling Cocks for hard water inlet.
4.7.4 ¨ Vacuum Breaker for protecting Fiberglass tanks from vacuum.
5.0 INSTRUCTIONS
_____ complete sets of installation, operating and maintenance manuals shall be provided.
6.0 FIELD SERVICE
The services of a factory authorized service representative can be made available to supervise, inspect and
provide operator training as required for initial start-up and system operation. Contact your local Culligan dealer
for service rates and scheduling.
7.0 WARRANTY
A single written warranty must be provided from the manufacturer of the water softener system covering
workmanship and materials.
Rev. 10/01