LAARS Multi Flue CF-100-3 - Install and Operating Manual User Manual
Page 12
12
T’stat information continued-
Adjusting the Thermostat: When adjusting the thermostat it should be
remembered that lower temperature settings are more energy efficient. To
adjust the thermostat, turn the dial clockwise to decrease the temperature and
counter-clockwise to increase the temperature. It is suggested that the
starting setting not exceed 120°F on the thermostat dial as indicated in (Figure
4).
CAUTION
Hotter water increases the risk of scald injury. Scalding may occur within
five (5) seconds at a temperature setting of 140°F. To protect against hot
water scald injury, install and anti-scald tempering valve in the water
system. This valve will reduce point of discharge temperature by mixing
cold and hot water in branch water lines. A qualified plumber should be
consulted.
Figure 4 – Thermostat with cover removed
WARNING
Escaping flue gases can be lethal. Make sure that the flue and venting
system is checked at least once a year by a plumbing professional or the
oil supplier's service technicians.