Casio IT-500 - Manual (Page 49)

E-47
Connecting the AC Adaptor for Cradle-type Battery Charger
Use the special AC adaptor for the Cradle-type Battery Charger to connect to a wall
outlet.
1. After making sure that the Cradle-type Battery Charger power switch is turned off,
plug the AC adaptor into the AC adaptor jack on the back of the charger.
2. Next, plug the AC adaptor into a power outlet.
3. Turn on the power. This causes the Cradle-type Battery Charger power indicator lamp
to light in red.
POWER
4. Making sure that their power contacts come into contact with each other, place the
Handheld Terminal onto the Cradle-type Battery Charger. This causes the Cradle-
type Battery Charger power indicator lamp to light in green.
When charging is initiated, indicator 1 on the IT-500 lights up in red. When charging
has been completed, indicator 1 on the IT-500 changes color from red to green.
Important !
Take care to avoid allowing the Cradle-type Battery Charger power contacts to
become connected to each other, which creates a short.
Shorting the power contacts can damage.
Power switch (OFF)
Power contacts
Power switch (ON)
Power Indicator Lamp