LABEC J-NBT - Manual (Page 10)

Operation Manual
J-NBT-M-E-09-001(REV.01)
P a g e 9
4. Installation.
4.1 Precautions for Installation
! This equipment is designed and manufactured to operate properly only in use of rated voltage. Refer to
specification section of this manual for rated voltage before installation.
! Use AC power cable that comes with (or installed to) the product.
! Do not touch the Power Cord wet handed.
! Avoid locations where the equipment is exposed to direct sunshine.
! Do not place the equipment in a corrosive atmosphere.
! Do not use the equipment in a flammable atmosphere.
! Do not use the equipment where ventilation is poor.
! Do not locate the equipment in a dusty location.
! Do not use in an unstable place that are subject to vibrations.
! Avoid locations of high humidity.
! Avoid locations where the equipment is exposed to high temperature.
! Recommended temperature range : 20' to 30 '
! Use the equipment indoors only.
! Secure adequate space around the power plug.
4.2 How to install
! Use with a minimum distance all around of 20cm from walls of other items.
! Locate in a flat place.
! Connect the power cord to an outlet with earthling point.
! In case of connecting to an outlet without earthling point, connect lead wire to the earth after
connecting grounding adapter.
4.3 How to ground Earth wire
! Earth wire must be grounded to prevent any electrical accidents.
! Improper or no grounding may cause electrical shock.
! Grounding terminal is included in the power plug.
! Therefore, there is no need to earth if plug in connected to a consent with grounding terminal.
! If grounding terminal with consent is not available, install adapter to plug to ground earth wire
from green terminal or install earth wire to the grounding terminal of the equipment.