LABEC M-SCEN-207 - Manual (Page 5)

(
Ⅲ
) INSTALLATION
1. When you take out centrifuge from carton, please check if there is any scratch, press
trace and damage on knob or not. If yes, please contact local dealer immediately.
2. Please install the centrifuge on a horizontal and stable table or bench. If not, it will
affect anti-vibration efficiency.
3. Please use power voltage as following range. To avoid electric shock please make sure
to connect ground wire to the ground terminal.
Power voltage Acceptable voltage range
100V / 110V 90V ~ 110V / 99V ~ 121V
220V / 240V 198V ~ 242V / 216V ~ 264V
4. Keep it away from dusty and moist working place.
5. Avoid the same power source with the large electric consumption machine at same time.
6. After dismantle or clean rotor, please must screw it tightly.
3