LABEC LDBH-1223 - Manual (Page 3)

Caution
Please observe the following safety measures before using your LABEC equipment. Please read
and follow the IQOQ document supplied with this heating block each and every use.
1.
These units are NOT FLAME PROOF and under no circumstances should inflammable,
combustible or explosive material be placed in the unit.
2. Low ignition temperature materials and those materials which give off inflammable or
explosive vapors should not be placed in the unit.
3. Avoid heating substances which give off corrosive vapor.
4. Users are advised of the dangers of heating combustible materials. The manufacturer can
recommend special types of elements which will prohibit the units temperature reaching
known ignition points.
5. Observe those rules pertaining to wiring and installation of electrical appliances as
recommended by the local supply authority.
WARNING
It is detrimental for any of the substances listed below to be inside this equipment. The interior of
the unit may be damaged if exposed to any of them. Corrosion of the stainless steel and other
surfaces will be directly attributable to the presence of one or more of these substances and will not
be a defect or failure for which the manufacturer will accept responsibility.
ORGANIC SUBSTANCES SALT ACIDS MISCELLANEOUS
ALKAFORM
AMMONIUM
BROMIDE
ACETIC
BROMIDE
ANAESTHESIA AMMONIUM
CHLORIDE
BORIC
CHLORINE
CARBON CALCIUM
CHLORIDE CARBOLIC
(PHENOL)
FLUORINE
TETRACHLORIDE CALCIUM
HYPOCHLORITE
CHROMIC
IODINE
FORMALDEHYDE FERRIC CHLORIDE
HYDROCYAIC
SULPHUR DIOXIDE
LYSOL(CRESOLS ETC) HYDROGEN
PEROXIDE
NITRIC
TRICHLORETHYLENE MAGNESIUM
CHLORIDE
OXALIC
MERCURIC
CHLORIDE
HYDROCHLORIC
POTASSIUM
CHLORIDE
PHOSPORIC
2
Laboratory Equipment Pty Ltd Instruction Manual – Heating Block