Solar dock post lites – Lake Lite LL-SDL-Round v5.3 User Manual

Page 3

Advertising
background image

NOTE: BATTERY MUST BE INSTALLED & CONNECTED TO FUNCTION

Installing your light on the dock post

This product uses a 1.2v NiMh Battery:  
Volts: 1.2v   Size: AA    Capacity: 1000mA 

DO NOT USE:  3.2v LiFePo4 or 3.7v Lithium type battery or Non 
rechargeable 1.5v batteries: they will damage this product 

1. Unscrew the top 
2. Install battery in correct position. 
3. Confirm that the silicone seal is installed 

correctly in the cover for sealing. 

4. Install cover with 4‐provided screws. 
NOTE: Screw the cover down to apply 
pressure on the seal. This will ensure the 
battery compartment is fully water proof.  

NOTE: Light is activated by darkness. (battery must be 
charged to light 
NOTE: Product uses AA 1.2v NiMh 1000mA or higher 
Note: higher capacity will result in longer run times 

NEW:  

Watch Online  
Installation Video! 

Assembling your light

Inside of Dock Lite View 

Solar Dock Post Lites

MODEL: LL-SDL-Round / Square / Rectangle

       Universal 
Flat Surface Mount 

Replace inside bolts 
with suitable mounting 
screws. (mounting 
screws not provided) 
 
Use appropriate screw 
for desired material.

          Fits   
 2‐3/8” OD Post 

           Fits 
 1‐5/8” OD Post 

If your light is slightly loose on the post you may add a layer or two of tape around your post before securing it to the post 
with the provided set screw. 

A separate silicon sleave is included if you have a 1‐7/8” OD post.  There is only approximately 1/8" difference in size 
between this fitting and the 2‐inch OD fitting.  Note, you may have both sizes if you have added new sections to your dock. 

      Fits Inside 
    Brock Post & 
   3‐1/4” ID Post

Remove Brock top cap, 
and press light inside 
the pipe. You may 
need to clear the glue 
from the inside of the 
pipe for your light to 
fit. You may drill a set 
screw if you wish.

Optional Light Options

Square & Rectangle MODELS

Please call or ask dealer

2” X 1‐1/2” 
Rectangle 

          Fits   
 2.00” OD Post  

Fits 

1‐7/8” OD Post 

   

With Silicone Adaptor

Lights assembled with square or 

rectangle bottoms only fit their 

respective posts sizes listed above 

2 x 2” Square 

and  

5‐Sided Square 

Lake Lite Inc. 
P.O. Box 414 
105 W. Simon St. 
Laotto, IN 46763 

Phone: 260‐918‐2758 
Fax:       260‐918‐3540 
E‐mail   [email protected] 

www.lakelite.com 
www.solardocklites.com 

Advertising