Lake Lite LL-SDD-DOT-X - Manual (Page 3)

Lake Lite Inc.
105 W. Simon St.
Laotto, IN 46763
Phone: 260-918-2758
Fax: 260-918-3540
E-mail [email protected]
www.lakelite.com
www.solarmarinelites.com
Solar Dock Dots – (1-3/8”)
MODEL: LL-SDD-X
CAUTION: CONTAINS NICKEL-CADMIUM BATTERIES. BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY.
Storage Tips (Harsh Winters)
Extreme winter weather can reduce the life expectancy of your Solar Dock Dot
1. Extreme Cold weather can dramatically reduce the life expectancy of your rechargeable Ni-Cd or Ni-Mh battery.
2. Store your Solar Dock Dot Lite inside during cold months when your dock is not in use.
Installing Batteries
1. Remove Back Cover with Screwdriver
2. Install Battery in correct position
3. Install Silicon Pad over battery
4. Install plastic cover with screw driver
5. Turn Tightly to make a good seal
(Replace with 1.2v NiCd or NiMh type Rechargeable Batteries ONLY)
Battery
Cover
Bottom View
Mounting to Surface
1. Mark Desired locations for mounting solar lights
2. Use 1-3/8” (35mm) diameter saw to make hole
3. Install lights into hole
4. If necessary you may use a silicone based glue to
secure light into place
Tools Required
Silicon Pad
1-3/8”