Compaq 1124 - Manual (Page 26)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-8 Installing the Repeater
Writer: Chris Seiter Project: Installing the Repeater Comments: 185810-001/707113-001
File Name:10024_3.DOC Last Saved On:3/14/96 11:56 AM
PWR B PWR A
Spring Screws
Redundant Power Supply Module
Figure 3-6. Installing a Redundant Power Module
4. Plug the power cord into the connector on the new power supply
module.
5. Insert the power cord’s three-pronged plug into a non-switched,
grounded power outlet on a wall, a power strip, or a grounded extension
cord. When you connect power, the PWR B LED indicator lights green,
which means that the power supply module is installed and functioning
correctly.
NOTE: If the power supply module does not have power or is not functioning
correctly, the PWR B LED indicator lights yellow.