Leapers Sport Airsoft Multi-Shot Combat Shotgun (SOFT-M3L) - Manual (Page 5)

To Set the Fire/Safety Button Position:
Warning! Always
use Precision
Ground Premium
6mm BB Pellets
for accuracy and
safety. Never
recyle pellets.
05
Warning! Before you follow the assembly
instruction, make sure to set the Fire/Safety
Button to the
position. “SAFE”
To set the Fire/Safety Button position:
!
!
!
!
Place the shotgun flat on a table in front of
you with the barrel pointing to the left and the
pistol grip bottom toward you.
The Safety/
Button is on
position, if the Button is “Down” as in Fig 1.1.
Fire the “SAFE”
The Safety/Fire Button is on “FIRE” position,
if the Button is “Up” as in Fig 1.2.
To change the Safety/Fire position, press the
button from the “Up” side to the opposite side.
Fig 1.1 - SAFE
Fig 1.2 - FIRE
Safety/Fire Selector
!
Push Shell Cartridge Compartment
Lever backward as in Fig. 1.3 to open
Compartment Door and take out the
Cartridge.
BB Pellets Loading:
! Load 6mm BBs into the Speed
Loader.
Align Speed Loader to the Shell
Cartridge receiving end as in Fig.1.4.
Push down on Speed Loader handle
to inject BBs. The Shell Cartridge
can hold up to 30 pellets.
Remove the Speed Loader from
Shell Cartridge.
!
!
!
Shell Cartridge
Compartment Lever
Fig 1.4 - Load
Speed Loader
Fig 1.3 - Lever
Compartment
Door