Leslie Controls GP Pressure reducing valve - Manual (Page 28)

Page 28
PART
PART NAME MATERIAL MATERIAL SPECIFICATION QTY.
NO.
F) 1/2" - 4” GPSS-1 & 1/2" GPSS-1S (STAINLESS STEEL - WETTED):
2 + DIAPHRAGM STAINLESS STEEL AISI TYPE 316 2
5 DIAPHRAGM COVER CARBON STEEL ASTM-A285, GR. C 1
6 DIAPHRAGM DISC STAINLESS STEEL AISI TYPE 316 1
7 * MAIN VALVE GUIDE NITRONIC 60 ASTM-A276 UNS S21800 1
8 BODY THREADED CAST SST ASTM-A351, GR. CF8M 1
8 BODY S.O. FLG (NOTE 7) CAST SST ASTM-A351, GR. CF8M 1
8 BODY 150# FLG CAST SST ASTM-A351, GR. CF8M 1
8 BODY 300# FLG CAST SST ASTM-A351, GR. CF8M 1
8 BODY S.W.E. CAST SST ASTM-A351, GR. CF8M 1
10* SEAT RING-1 (NOTE 6) (NOTE 6) 1
10* SEAT RING-1S STELLITED SST (NOTE 8) 1
12+ BOTTOM CAP GASKET GRAPHITE w/SST 304 COMMERCIAL 1
13 BOTTOM CAP (NOTE 2) CAST SST ASTM-A351, GR. CF8M 1
14 BOTTOM CAP BUSHING NITRONIC 60 ASTM-A276 UNS S21800 1
16 DIAPHRAGM BASE CAST SST ASTM-A351, GR. CF8M 1
G) 1/2" - 4" GPHS-1 (HIGH PRESSURE)
2+ DIAPHRAGM STAINLESS STEEL AISI TYPE 316 3
3 BOLT STEEL ASTM-A193, GR. B7 (NOTE 1)
5 DIAPHRAGM COVER CARBON STEEL ASTM-A285, GR. C 1
10* SEAT RING STELLITED SST (NOTE 13) 1
+ RECOMMENDED SPARE PARTS.
* THESE PARTS, PLUS RECOMMENDED SPARE PARTS, SHOULD BE ON HAND WHEN OVERHAULING THIS
EQUIPMENT.
PARTS LIST, GPS-1 & VARIANTS:
WHEN ORDERING PARTS, GIVE SIZE, CLASS, PART NAME, AND PART REFERENCE NUMBER FROM TABLE
BELOW. USE PART NUMBER ONLY TO LOCATE PART ON DRAWING.