Levana Ayden - Manual (Page 9)

16 17
OPERATION
Setting the Brightness
Brightness Mode sets the brightness of the
the screen. A dimmer screen will extend the
battery life.
1. Press the Menu / Exit button and use
the Navigational arrow keys to navigate
the different Brightness Settings.
2. Press Select + to confirm your choice.
3. Press Menu / Exit button to save your
selection and return to main menu.
Sound Sensitivity Settings
Sensitivity Mode allows you to adjust the sensitivity of the sound the camera picks up.
The LED Ring on the front of the monitor also indicates how loud the sound in the room
is with colors.
1. Press the Menu / Exit button and use
the Navigational arrow keys to navigate
the different Sound Sensitivity Settings.
2. Press Select + to confirm your choice.
3. Press Menu / Exit button to save your
selection and return to main menu.
whisper, murmer
Disconnected
Chatter
Yelling
Temperature Settings
Studies indicate your baby’s room should be between 68-71° F (20- 21° C). This camera
includes a temperature monitor for your baby’s room. The temperature of the nursery
can be shown with your video monitor’s on-screen display in your choice of Fahrenheit
or Celsius so you will always know that your baby is comfortable.
1. Press the Menu / Exit button and use
the Navigational arrow keys to navigate
the different Temperature Settings.
2. Press Select + to confirm your choice.
3. Press Menu / Exit button to save your
selection and return to main menu.
OPERATION
TROUBLESHOOTING
ISSUE POSSIBLE SOLUTION
Equipment does not function
• Confirm that the Camera and Monitor are ON
• The battery may be depleted; charge battery
• The power adapter(s) may not be
properly connected
No reception
• Camera and monitor may not be properly paired;
move the Camera and Monitor closer together
Reception Interference (static)
• The Camera and Monitor may be too far apart
• The battery power may be too low
• Other electronic devices may be interfering with
the signal
• The Camera and Monitor may be placed too close
to many metal objects
Noise (static, beeping) • Battery power may be too low
The rechargeable battery will
not charge
• The power adapter may not be connected
• Battery pack may not be properly connected inside
the battery compartment