Levana Lila Manual - Manual (Page 10)

Note: Baby monitors and cameras with power cords should never be hung on or near the
crib as it is a strangulation hazard. Power cords should be kept no less than 3 feet away
from the crib and the baby’s reach at all times.
Connecting Power to the Monitor / Charging Battery
1. Connect the small end of power adapter marked
MONITOR into the DC input on the side of the
monitor as shown in the diagram.
2. Connect the other end of the adapter into an available
wall outlet. For safety reasons, ONLY use the adapters
included in the package.
3. Press the POWER / VIDEO ON-OFF BUTTON
4. The icon in the top right corner of the main screen will
show you the battery power status.
EMPTY CHARGING FULL
Connecting Power to the Camera
1. Connect the small end of the power
adapter marked CAMERA into the DC
input on the back of the camera base as
shown in the diagram. For safety reasons,
ONLY use the adapters included in the
package.
2. On the side of the camera, slide the
POWER switch UP to the ON
position. The POWER LED will light up.
DC Input
ON / OFF
Switch
DC Input
Power LED
SETUP
10