LEWITT LCT 640 - Manual (Page 7)

07
Using the mic
LCT 640
Key-lock function
The push buttons of the microphone can be locked and unlocked by constantly pressing the polar pattern push button ③ for more than 2
seconds.
Clipping history
Checking the clipping history lets you know if the microphone had experienced clipping in the past. The microphone displays the clipping
history after constantly pressing the high-pass push button ⑦ for more than 2 seconds. When in clipping history mode the status indicator ①
flashes red and white in an alternating sequence, the polar pattern indications ② as well as the high-pass indications ⑥ are not illuminated.
Clipping history mode provides information and works according to the rules listed below:
·The last manually set attenuation level is indicated by a constantly illuminated attenuation LED. If clipping has occurred in the past this
LED will flash.
·The clipping history information can only be accessed once. Clipping information will be deleted after leaving this mode by constantly
pressing the high-pass push button ⑦ for more than 2 seconds.
·Clipping history information will be deleted once you access the automatic attenuation mode.
·Clipping history information will not be deleted when unplugging the microphone.