LEWITT MTP 540 DM/DMs - Manual (Page 11)

LEWITT GmbH declares under its sole responsibility that MTP 40 DM / DMs
complies with the European directive 2004/108/EC. The product has
been tested according to harmonized European standards:
MTP 40 DM / DMs
5
EN 55013:2001+A1:2003+A2:2006
EN 55020:2007
EN 61000-3-2:2006
EN 61000-3-3:1995+A1:2001+A2:2005
Product testing was carried out by TIMCO Engineering Inc., notified body
number 1177.
LEWITT GmbH hereby declares under its sole responsibility that
5 has been tested and conforms to the following FCC and
ANSI standards:
FCC Part 15:2008 Section 15.109
ANSI C63.4:2003
Product testing was carried out by INTERTEK Testing Services Shenzhen Ltd.
WEEE note: Electronic waste has to be collected separately. Please bring
this device to a local recycling center at the end of its life time.
Manufacturers signature:
Date: 18th November 2010 DI Roman Perschon
Place: Vienna, AUSTRIA CEO – Lewitt GmbH
Declaration of conformity can be downloaded at www.lewitt-audio.com or
obtained from [email protected].
Regulatory information
MTP 540 DM / DMs
11