LEWITT MTP 840 DM - Manual (Page 13)

13
MTP 840 DM
Regulatory information
LEWITT GmbH declares under its sole responsibility that
complies with the European directive 2004/108/EC. The product has been
tested according to harmonized European standards:
MTP 840 DM
EN 55013:2001+A1:2003+A2:2006
EN 55020:2007
EN 61000-3-2:2006
EN 61000-3-3:1995+A1:2001+A2:2005
Product testing was carried out by TIMCO Engineering Inc., notified body
number 1177.
LEWITT GmbH hereby declares under its sole responsibility that MTP 840 DM
has been tested and conforms to the following FCC and ANSI standards:
FCC Part 15:2008 Section 15.109
ANSI C63.4:2003
Product testing was carried out by SEM.Test Compliance Service Co., Ltd.
WEEE note: Electronic waste has to be collected separately. Please bring
this device to a local recycling center at the end of its life time.
Manufacturers signature:
Date: 25th July 2013 DI Roman Perschon
Place: Vienna, AUSTRIA CEO – Lewitt GmbH
Declaration of conformity can be downloaded at www.lewitt-audio.com or
obtained from [email protected].