LEWITT LTS 240 Diversity C+D - Manual (Page 6)

Using the mic
LTS 240 Diversity C+D
Quick start
the backside of the receiver.
2. Make sure that the volume of your mixer is turned down before you connect the receiver via a balanced or unbalanced cable.
3. Then turn on the receiver with the on/off switch on the backside ⑩.
4. Open the transmitter body and insert two AA batteries.
5. Turn the transmitter on and make sure the channel selection matches the one on the receiver ⑥.
6. Adjust the volume level on the backside of the receiver and on your mixer to the desired level.
1. Connect the power supply to mains and the receiver ⑧. We recommend to secure the power cable with the security latch ⑨ on
Best performance
7
8. Position the receiver in a reasonable distance to metal surfaces, walls and other RF equipment.
9. Check which channel provides the most reliable sound transmission in your specific setup.
10. Adjust the squelch control according to the size of your venue. Turn the squelch control to plus for long operating range.
Decrease the operating range and improve the signal reception by turning the squelch control to minus .
. Use balanced XLR cables in order to avoid EMI effects.
06