Canon W7250 - Manual (Page 45)

Loading Cut Sheets
19
2-19
Important
2
Press Paper Source. The Cut Sheet lamp lights.
Pressing Paper Source alternates the selection between Roll Media and Cut
Sheet.
When the printer is set up on the stand and with roll media loaded in the
printer, the roll media automatically retracts to the standby position and the
printer enters the cut sheet mode.
z If the roll media is not to be used for a week or so, open the roll media tray and take
up the roll media until it is cleared from the paper guide. Leaving the roll media at
the standby position for a week or longer could cause a media misfeed.
Enter Cancel
Cut Sheet
Roll Media
Paper Source Data Message Power
Online